AVAYA_LSP Configuration Syntax

The AVAYA_LSP Configuration file is used to add the node name, IP address and primary-controller of each LSP that is to be monitored. Up to 20 LSPs can be monitored from a single Monitoring Server.

Optional parameters are available to add a customer and/or site name to a node/IP address. This information can be then used to assist in identifying data in the Displays.

SUBSYS AVAYA_LSP

ADD LSP (<lsp_name>, ip=<ip_address>)[, customer=<customer_name>][, site=<site_name>])
[DEFINE SAT_PROFILE (<pbx_name>[, mode={telnet|ssh}][, port=<port_number>])]

Syntax Elements

ADD LSP

This entry is used to add each LSP name and its corresponding IP address.

<lsp_name>

Name given to the LSP device.

ip=<ip_address>

IP address of the LSP device.

customer=<customer_name>

(Optional) A customer name to associate with the LSP. When added this will be shown in the various Displays.

site=<site_name>

(Optional) A site (location) name to associate with the LSP. When added this will be shown in the various Displays.

DEFINE SAT_PROFILE

The default LSP connections are secure (SSH) on port 5022. However, non-default connections can be accommodated and the configuration settings for these are included in the optional DEFINE SAT_PROFILE statement.

<pbx_name>

The name of the PBX to which the LSP is registered.

mode={telnet|ssh}

Either telnet or ssh.

port=<port_number>

The SAT connection port on the LSP.



Provide feedback on this article