Help Center

Threshold - cmaLocationCAC

Properties

Nodes to Run On: #DefaultNode

Threshold Conditions

CmaImmersiveLocBwMax

Where Clause:

IBWFAILI > 0

Alarm Interval:

Every1 Hour(s)

Nodes to Monitor:

#All Telephony Systems\Cisco CallManager Appliance\Clusters

Record:

CMALOCST

Recommended action:

The Location or Link connecting locations has run out of immersive video bandwidth and hence no further immersive video calls can originate or pass through the location/link leading to call failure. The out of resource condition may be temporary due to high number of calls during peak hours and may correct by itself when calls terminate and bandwidth is freed up. However, if it is not at all acceptable to have any calls fail because of bandwidth, please consider adding additional bandwidth to the location/link.

Message Destinations:

Availability

Entity Name

^srcnode@ lc @CMALOCST.INSTNAME@

Primary Sub ID

@CMALOCST.CLUSTER@

Secondary Sub ID

LOCATION

Monitored Type

THRESHOLD 

Target Entity Type

Configure new entity 

Event Text

^srcnode@: Location @CMALOCST.INSTNAME@ out of immersive bandwith, calls failed: @CMALOCST.IBWFAILI@ (^srcnode@)

Priority

1

Timeout on stop

1 Day(s)

Problem Summary

Event No

0

Message

^srcnode@: Location @CMALOCST.INSTNAME@ out of immersive bandwith, calls failed: @CMALOCST.IBWFAILI@ (^srcnode@)

Severity

 Error

SNMP Trap

Message

^srcnode@: Location @CMALOCST.INSTNAME@ out of immersive bandwith, calls failed: @CMALOCST.IBWFAILI@ (^srcnode@)

Severity

 Error

Dispatch Manager

Message

^srcnode@: Location @CMALOCST.INSTNAME@ out of immersive bandwith, calls failed: @CMALOCST.IBWFAILI@ (^srcnode@)

Severity

 Error

CmaImmersiveLocBwNearMx

Where Clause:

IBWMAX <> 0 and IBWUSEP > 90

Alarm Interval:

Every5 Minute(s)

Nodes to Monitor:

#All Telephony Systems\Cisco CallManager Appliance\Clusters

Record:

CMALOCST

Recommended action:

The Location or Link connecting locations is close to its immersive video bandwidth. If the trend continue, further immersive video calls might not be able to originate or pass through the location/link. The out of resource condition may be temporary due to high number of calls during peak hours and may correct by itself when calls terminate and bandwidth is freed up. If this condition happens frequently, please consider adding additional bandwidth to the location/link.

Message Destinations:

SNMP Trap

Message

^srcnode@: Location: @CMALOCST.INSTNAME@ immersive bandwidth used @CMALOCST.iBWUSEP@% (^srcnode@)

Severity

 Warning

Problem Summary

Event No

0

Message

^srcnode@: Location: @CMALOCST.INSTNAME@ immersive bandwidth used @CMALOCST.iBWUSEP@% (^srcnode@)

Severity

 Warning

Dispatch Manager

Message

^srcnode@: Location: @CMALOCST.INSTNAME@ immersive bandwidth used @CMALOCST.iBWUSEP@% (^srcnode@)

Severity

 Warning

CmaImmersiveLocBwOk

Where Clause:

IBWFAILI = 0

Alarm Interval:

Every1 Hour(s)

Nodes to Monitor:

#All Telephony Systems\Cisco CallManager Appliance\Clusters

Record:

CMALOCST

Recommended action:

No action is required.

Message Destinations:

Availability

Entity Name

^srcnode@ lc @CMALOCST.INSTNAME@

Primary Sub ID

@CMALOCST.CLUSTER@

Secondary Sub ID

LOCATION

Monitored Type

THRESHOLD 

Target Entity Type

Configure new entity 

Event Text

^srcnode@: location @CMALOCST.INSTNAME@ available bandwidth: @CMALOCST.IBWMAX@ kbps (^srcnode@)

Priority

1

Timeout on stop

1 Day(s)

CmaLocationBwMax

Where Clause:

BWFAILI > 0

Alarm Interval:

Every1 Hour(s)

Nodes to Monitor:

#All Telephony Systems\Cisco CallManager Appliance\Clusters

Record:

CMALOCST

Recommended action:

The Location or Link connecting locations has run out of audio bandwidth and hence no further audio calls can originate or pass through the location/link leading to call failure. The out of resource condition may be temporary due to high number of calls during peak hours and may correct by itself when calls terminate and bandwidth is freed up. However, if it is not at all acceptable to have any calls fail because of bandwidth, please consider adding additional bandwidth to the location/link.

Message Destinations:

Availability

Entity Name

^srcnode@ lc @CMALOCST.INSTNAME@

Primary Sub ID

@CMALOCST.CLUSTER@

Secondary Sub ID

LOCATION

Monitored Type

THRESHOLD 

Target Entity Type

Configure new entity 

Event Text

^srcnode@: Location @CMALOCST.INSTNAME@ out of bandwith, calls failed: @CMALOCST.BWFAILI@ (^srcnode@)

Priority

1

Timeout on stop

1 Day(s)

Problem Summary

Event No

0

Message

^srcnode@: Location @CMALOCST.INSTNAME@ out of bandwith, calls failed: @CMALOCST.BWFAILI@ (^srcnode@)

Severity

 Error

SNMP Trap

Message

^srcnode@: Location @CMALOCST.INSTNAME@ out of bandwith, calls failed: @CMALOCST.BWFAILI@ (^srcnode@)

Severity

 Error

Dispatch Manager

Message

^srcnode@: Location @CMALOCST.INSTNAME@ out of bandwith, calls failed: @CMALOCST.BWFAILI@ (^srcnode@)

Severity

 Error

CmaLocationBwOk

Where Clause:

BWFAILI = 0

Alarm Interval:

Every1 Hour(s)

Nodes to Monitor:

#All Telephony Systems\Cisco CallManager Appliance\Clusters

Record:

CMALOCST

Recommended action:

No action is required.

Message Destinations:

Availability

Entity Name

^srcnode@ lc @CMALOCST.INSTNAME@

Primary Sub ID

@CMALOCST.CLUSTER@

Secondary Sub ID

LOCATION

Monitored Type

THRESHOLD 

Target Entity Type

Configure new entity 

Event Text

^srcnode@: location @CMALOCST.INSTNAME@ available bandwidth: @CMALOCST.BWMAX@ kbps (^srcnode@)

Priority

1

Timeout on stop

1 Day(s)

CmaLocationBwUsed

Where Clause:

BWMAX <> 0 and BWUSEP > 90

Alarm Interval:

Every5 Minute(s)

Nodes to Monitor:

#All Telephony Systems\Cisco CallManager Appliance\Clusters

Record:

CMALOCST

Recommended action:

The Location or Link connecting locations is close to its audio bandwidth. If the trend continue, further audio calls might not be able to originate or pass through the location/link. The out of resource condition may be temporary due to high number of calls during peak hours and may correct by itself when calls terminate and bandwidth is freed up. If this condition happens frequently, please consider adding additional bandwidth to the location/link.

Message Destinations:

SNMP Trap

Message

^srcnode@: Location: @CMALOCST.INSTNAME@ bandwidth used @CMALOCST.BWUSEP@% (^srcnode@)

Severity

 Warning

Problem Summary

Event No

0

Message

^srcnode@: Location: @CMALOCST.INSTNAME@ bandwidth used @CMALOCST.BWUSEP@% (^srcnode@)

Severity

 Warning

Dispatch Manager

Message

^srcnode@: Location: @CMALOCST.INSTNAME@ bandwidth used @CMALOCST.BWUSEP@% (^srcnode@)

Severity

 Warning

CmaVideoLocationBwMax

Where Clause:

VBWFAILI > 0

Alarm Interval:

Every1 Hour(s)

Nodes to Monitor:

#All Telephony Systems\Cisco CallManager Appliance\Clusters

Record:

CMALOCST

Recommended action:

The Location or Link connecting locations has run out of video bandwidth and hence no further audio calls can originate or pass through the location/link leading to call failure. The out of resource condition may be temporary due to high number of calls during peak hours and may correct by itself when calls terminate and bandwidth is freed up. However, if it is not at all acceptable to have any calls fail because of bandwidth, please consider adding additional bandwidth to the location/link.

Message Destinations:

Availability

Entity Name

1 lc vid @CMALOCST.INSTNAME@

Primary Sub ID

@CMALOCST.CLUSTER@

Secondary Sub ID

LOCATION

Monitored Type

THRESHOLD 

Target Entity Type

Configure new entity 

Event Text

^srcnode@: No video resources, location @CMALOCST.INSTNAME@. Max available bandwidth: @CMALOCST.BWAVAIL@ kbps. (^srcnode@)

Priority

1

Timeout on stop

1 Day(s)

Problem Summary

Event No

0

Message

^srcnode@: Location @CMALOCST.INSTNAME@ out of video bandwidth, calls failed: @CMALOCST.VBWFAILI@. (^srcnode@)

Severity

 Error

SNMP Trap

Message

^srcnode@: Location @CMALOCST.INSTNAME@ out of video bandwidth, calls failed: @CMALOCST.VBWFAILI@. (^srcnode@)

Severity

 Error

Dispatch Manager

Message

^srcnode@: Location @CMALOCST.INSTNAME@ out of video bandwidth, calls failed: @CMALOCST.VBWFAILI@. (^srcnode@)

Severity

 Error

CmaVideoLocationBwNearMx

Where Clause:

VBWMAX <> 0 AND VBWUSEP > 90

Alarm Interval:

Every5 Minute(s)

Nodes to Monitor:

#All Telephony Systems\Cisco CallManager Appliance\Clusters

Record:

CMALOCST

Recommended action:

The Location or Link connecting locations is close to its video bandwidth. If the trend continue, further video calls might not be able to originate or pass through the location/link. The out of resource condition may be temporary due to high number of calls during peak hours and may correct by itself when calls terminate and bandwidth is freed up. If this condition happens frequently, please consider adding additional bandwidth to the location/link.

Message Destinations:

SNMP Trap

Message

^srcnode@: Location @CMALOCST.INSTNAME@ video bandwidth used @CMALOCST.VBWUSEP@ % (^srcnode@)

Severity

 Warning

Problem Summary

Event No

0

Message

^srcnode@: Location @CMALOCST.INSTNAME@ video bandwidth used @CMALOCST.VBWUSEP@ % (^srcnode@)

Severity

 Warning

Dispatch Manager

Message

^srcnode@: Location @CMALOCST.INSTNAME@ video bandwidth used @CMALOCST.VBWUSEP@ % (^srcnode@)

Severity

 Warning

CmaVideoLocationBwOk

Where Clause:

VBWFAILI = 0

Alarm Interval:

Every1 Hour(s)

Nodes to Monitor:

#All Telephony Systems\Cisco CallManager Appliance\Clusters

Record:

CMALOCST

Recommended action:

No action is required.

Message Destinations:

Availability

Entity Name

1 lc vid @CMALOCST.INSTNAME@

Primary Sub ID

@CMALOCST.CLUSTER@

Secondary Sub ID

LOCATION

Monitored Type

THRESHOLD 

Target Entity Type

Configure new entity 

Event Text

^srcnode@: Location @CMALOCST.INSTNAME@ available video bandwidth: @CMALOCST.BWAVAIL@ kbps. (^srcnode@)

Priority

1

Timeout on stop

1 Day(s)

Provide feedback on this article